Electronic Cigarette Gives Burnt Taste

 Electronic Cigarette Tastes Burning,  We Know Why

Almost every electronicist knows very well that his favorite electronic cigarette can stop enjoying the pleasant taste of the aroma, giving it some unpleasant bitterness. 

How to determine if the cotton in the tank is dry or if the mode is set to an inappropriate power?

But what if the problem is with the user himself, taking too long puffs overheating the coils and causing the cotton inside to burn slightly? 

A burnt hit is probably not pleasant, but below are the main causes of E Cigarette burning taste and ways to fix it.

Why Did My E Cigarette Taste Burn With The New Coil?

Even with a new coil, chain vaping may be the reason why the E Cigarette taste burns. It refers to taking a few hits without pausing. Especially for beginners, maybe this is the source of the coil burnout.

Each E Cigarette has one chain vaping at a time. Also, seasoned papers can hit the fire button a little too hard when delicious e-liquid is poured into the tank.

However, chain vaping will mess up your coil as it does not allow the wick to absorb any more juice after puffs. As a result, the cable dries up and burns.

How to Stop Chain Vaping

Stopping burnout with chain vaping seems simple. Allow only about 30 seconds of breathing space between breaths.

However, in practice, it is often more deceptive than that. Many people, especially novices, are former smokers and tend to take many short strokes, as with a tobacco cigarette. A few people are also addicted to nicotine, and chain vaping can help quench that thirst.

If you're chain vaping to quell nicotine cravings, consider replacing it with an e-liquid with a higher concentration of nicotine.

The e-liquid with high PG content offers a more relaxing throat hit. And this is the desire of many ex-smokers. You can also try taking long, softer breaths and pocketing the pens to avoid temptation.

If you like chain vaping and don't want to stop, you may want to try a rebuildable dripping atomizer (RDA). RDAs require re-dripping after a few hits. However, an E Cigarette does not have to wait longer for the liquid to soak into their wicks.

But these are the best vapes and are not recommended for beginners. Instead, you can buy two different gadgets and switch between them.

How to Fix Burnt Taste of Electronic Cigarette?

Have you experienced a fresh burnt E Cigarette taste after a puff or two? This happens often. Many people have encountered this once, if not twice, and it's very annoying. Some people assume that this is the result of a faulty coil.

However, new coils often burn because they are not primed before use. Coil priming mainly aims to prime it and soak the wick with E Cigarette liquid. If you skip filling your coil and ignite a dry wick, it will cause a burnt and irritating taste.

How to Fill Coils

Coil preparation is a simple task.

Everything in order. Please make sure the coil is compatible with your device and check the watt limit written next to the coil. Make sure you do not exceed this when vaping.

When the wattage is exceeded, the coil will glow.

Saturate the wick by dripping burnt flavor and juice into each coil hole before placing the coil in your tank. It's a good idea to understand the wattage when starting the E Cigarette.

By vaping at the appropriate wattage, the burning taste can be avoided and more importantly, you can get the most out of your device.

A few coils have two small entry holes. One has a larger hole on the side and the other on the top of the coil.

Make sure you see the cotton-like wick through every opening.

Drop about three drops of e-liquid into the holes, stop when the liquid starts to raise the cavity. After wetting the holes with e-liquid, let the fresh coil rest for a few minutes.

There is some controversy over how long it takes for the juice to brew. Some people will let it soak for a few minutes. Others believe that steam tastes better if you let the gadget rest for a few hours. Whatever the time, if you choose to put down your gadget, be sure to give it a dry 'priming stroke' or two before using it.

A liner puff means making short, sharp pants out of the gadget without pressing the ignition. By doing this, you're assured of the most delicious possible first puff when you really want to exhale burnt flavors. Check out the detailed guide on how to prepare your coils.

Is Higher Watt Better for High Shot?

High power vaping will mess up your coils. Exceeding the prescribed wattage range (printed on the side of your coils) will result in faster roasting or spoilage.

Vaping at a higher temperature will also cause the e-liquid to evaporate faster than the wick can absorb. Frequent inflation of the E Cigarette pen will cause the E Cigarette taste to burn.

How to Make High Power Vaping?

If you have a gadget with adjustable voltage or wattage, be sure to keep the average. Don't get the power too high, especially if you like doing longer strokes. Also, this is a typical issue that occurs when breathing.

If you like to smoke 24/7, you may want to consider upgrading your tank system or investing in a rebuildable atomizer.

Why Is E Cigarette Liquid Declining So Quickly?

Do you like to go overboard with your tank before refilling? It may be breaking the coils. Allowing the tank to run dry or nearly dry will leave the wick with insufficient e-liquid to absorb. As a result, E Cigarettes taste burnt.

Many people are tempted to use the latest squirts of juice when their E Cigarette juice level drops. However, if you find that the e-liquid is not hiding the intake holes in your coil, continued vaping will result in dry and burning hits.

To prevent your e-cigarette from drying out, consider filling your tank to a higher level. A reasonable level ensures good sealing of the intake holes. If you intend to change the flavors, pour the remaining e-liquid back into the container and drip in your new juice. You can also try mixes of flavors.

How to Choose E-Juice to Avoid Burnt Taste?

Some E Cigarette juices create problems for the coils and can cause clogging. This is a glitch for e-liquid, which requires a high VG concentration and contains a higher sugar content. E-liquids that require a higher concentration of VG appear to be more viscous than liquids based primarily on a PG.

This means that larger VG e-liquids are denser and harder for the coil wicks to absorb, causing E Cigarette pens to fail. Sugar is highly flammable, so higher VG juices are easier to burn, resulting in an unpleasant taste.

It is recommended to use lower VG E Cigarette juices - no more than 70%. You can also switch your tank system to one with a more reliable wick. E cigarette juice with higher sugar content leads to the same mistakes for your coil.

When ignited, the sugary e-liquid can burn on the coil preventing it from absorbing water. Muck stock can also cause the E Cigarette flavor to burn. The most loved and softening flavors are the most important coil spoilers.

As our sense of smell and taste changes as we age, older vapers have a much harder time dealing with the burnt taste when vaping. More reasons to follow this guide and make sure your juice doesn't burn!

Concluding Thoughts on How to Fix Burnt E Cigarette Flavors

To avoid a burnt taste, follow this simple advice:

Only use high quality vaping liquids

Try not to allow the liquid in the device to be completely consumed.

Store the e-cigarette in a neat, clean and dry place

Maintain intervals of at least 5 seconds between breaths

Use a suitable resistance coil

Clean the coils regularly.

If you know more ways to fix the e Cigarette burnt taste, please share in the comments below.